Atlanta Power ShineDeck and fence staining
Most of a stain job’s life is decided before the first coat. We take our time on the prep so the finish lasts.
A good stain shows off the grain and shields the wood from sun, rain and Georgia humidity. A rushed one peels or blotches within a season or two, and then it has to be stripped before it can be redone.
So we clean, dry, check and protect before any stain goes on. We use high-quality, durable products in natural or bold tones and help you choose the look you want.
Get a free quoteHow a staining job runs
Clean the wood
We remove dirt, gray weathering and old residue without damaging the surface, so the wood can take stain evenly.
Let it dry, then check it
Wood can look dry and still hold moisture. We give it 48 to 72 hours after cleaning, longer when it’s humid, and check moisture before staining.
Protect everything nearby
Siding, trim, concrete and plants get covered or masked first. Overspray is far harder to remove later than to prevent.
Stain evenly
We work in the right conditions and keep a wet edge, so you get even color with no lap lines or blotches.
Deck and Fence Staining projects
How we protect your property
Preparation and protection
- Walk the property first. Before any water hits your home, we look at every surface, spot the risks and choose the method for each one.
- Protect plants and landscaping. We wet plants beforehand, manage runoff, use neutralizers when needed and rinse again afterward.
- Use the right pressure. Low-pressure soft washing on siding, roofs and painted wood. Pressure washing only on concrete and pavers.
- Cover and mask before staining. Siding, trim, concrete and anything nearby get protected from overspray before stain goes on.
Attention to quality
- We check wood moisture before staining and let it dry fully after cleaning.
- Stain goes on evenly with no lap lines or missed boards.
- We sweat the details nobody else would notice, and leave your property better than we found it.
- Every job is backed by a 100% satisfaction guarantee.
Clear communication
- A clear quote for only the work you want.
- We schedule around you and show up when we said we would.
- Not home? We’ll send photo or video updates as we work.
- Questions any time by call or text at (404) 798-3581.
Questions
How long does stain take to dry?
Usually 4 to 12 hours, depending on humidity, temperature, sun and the product. Stay off the deck and keep furniture away for 48 to 72 hours so it can cure fully.
Why do some stain jobs fail early?
Almost always moisture or poor prep, not the product. Wet wood, leftover residue and stain applied in direct heat all cause peeling, blotches and lap marks.
How long does the job take?
Most projects finish in a day once the wood is dry, though it depends on the size of the area.
How is the job priced?
It depends on the size of the area, the condition of the wood and the stain you choose. We’ll visit for a free consultation and give you an upfront quote.
Where we work
We do deck and fence staining in these Atlanta neighborhoods and nearby areas:
Ready to get started?
Tell us what needs doing and we’ll send a free quote. Prefer to talk? Call or text (404) 798-3581.
Get a free quote